The manufacturer:
Production:
Prev 1 2 3 4 5 Next
| UNIFIED HYDRAULIC CYLINDERS |  |
|
|
Hydraulic cylinder designation |
Parameters D-d-S-L |
Fastening method |
Working fluid delivery method |
Prat
MPa |
m, kg |
Dynamic connection seal manufacturer |
|
ÊÃÖÌ50.25.000 ÊÃÖÌ50.25.000-01 ÊÃÖÌ50.25.000-02 ÊÃÖÌ50.25.000-03 ÊÃÖÌ50.25.000-04 ÊÃÖÌ50.25.000-05 ÊÃÖÌ50.25.000-06 ÊÃÖÌ50.25.000-07 ÊÃÖÌ50.25.000-08 |
50-25-60-310
50-25-80-330
50-25-100-350
50-25-125-375
50-25-160-410
50-25-200-450
50-25-250-500
50-25-320-570
50-25-400-650 |
28-mm wide ears with the ØÑ25 bearings on the rod and sleeve. |
Two holes N116*1.5 |
16 |
4.9
5.2
5.4
5.8
6.2
6.7
7.4
8.3
9.4 |
Busak+ Shamban |
|
ÊÃÖÌ50.32.000 ÊÃÖÌ50.32.000-01 ÊÃÖÌ50.32.000-02 ÊÃÖÌ50.32.000-03 ÊÃÖÌ50.32.000-04 ÊÃÖÌ50.32.000-05 ÊÃÖÌ50.32.000-06 ÊÃÖÌ50.32.000-07 ÊÃÖÌ50.32.000-08 ÊÃÖÌ50.32.000-09 ÊÃÖÌ50.32.000-10 ÊÃÖÌ50.32.000-11 |
50-32-60-310
50-32-80-330
50-32-100-350
50-32-125-375
50-32-160-410
50-32-200-450
50-32-250-500
50-32-320-570
50-32-400-650
50-32-500-750
50-32-560-810
50-32-630-880 |
28-mm wide ears with the ØÑ25 bearings on the rod and sleeve. |
Two holes N116*1.5 |
16 |
5.3
5.6
5.9
6.3
6.8
7.4
8.2
9.3 10.5 12.1 13 14.1 |
Busak+ Shamban |
|
ÊÃÖÌ63.32.000 ÊÃÖÌ63.32.000-01 ÊÃÖÌ63.32.000-02 ÊÃÖÌ63.32.000-03 ÊÃÖÌ63.32.000-04 ÊÃÖÌ63.32.000-05 ÊÃÖÌ63.32.000-06 ÊÃÖÌ63.32.000-07 ÊÃÖÌ63.32.000-12 |
63-32-160-420
63-32-200-460
63-32-250-510
63-32-320-580
63-32-400-660
63-32-500-760
63-32-560-820
63-32-630-890
63-32-430-680 |
28-mm wide ears with the ØÑ25 bearings on the rod and sleeve. |
Two holes N120x1.5 |
16 |
9.1
9.7 10.4 11.4 12.6 14 14.9 15.9 13 |
Busak+ Shamban |
ØÑ30 bearings |
|
ÊÃÖÌ63.40.000 ÊÃÖÌ63.40.000-01 ÊÃÖÌ63.40.000-02 ÊÃÖÌ63.40.000-03 ÊÃÖÌ63.40.000-04 ÊÃÖÌ63.40.000-05 ÊÃÖÌ63.40.000-06 ÊÃÖÌ63.40.000-07 ÊÃÖÌ63.40.000-08 ÊÃÖÌ63.40.000-09 ÊÃÖÌ63.40.000-10 ÊÃÖÌ63.40.000-11 |
63-40-160-420
63-40-200-460
63-40-250-510
63-40-320-580
63-40-400-660
63-40-500-760
63-40-560-820
63-40-630-890
63-40-710-970
63-40-800-1060
63-40-900-1160
63-40-1000-1260 |
28-mm wide ears with the ØÑ25 bearings on the rod and sleeve. |
Two holes N120x1.5 |
16 |
9.8 10.5 11.4 12.7 14.1 15.9 17 18.3 19.7 21.4 23.2 25.1 |
Busak+ Shamban | |
| The manufacturer: Ltd Co «Hydraulic machine building plant» |
| UNIFIED HYDRAULIC CYLINDERS |  |
|
|
Hydraulic cylinder designation |
Parameters D-d-S-L |
Fastening method |
Working fluid delivery method |
Prat
MPa |
m, kg |
Dynamic connection seal manufacturer |
|
ÊÃÖÌ80.40.000 ÊÃÖÌ80.40.000-01 ÊÃÖÌ80.40.000-02 ÊÃÖÌ80.40.000-03 ÊÃÖÌ80.40.000-04 ÊÃÖÌ80.40.000-05 ÊÃÖÌ80.40.000-06 ÊÃÖÌ80.40.000-07 ÊÃÖÌ80.40.000-08 ÊÃÖÌ80.40.000-09 ÊÃÖÌ80.40.000-10 ÊÃÖÌ80.40.000-11 ÊÃÖÌ80.40.000-12 ÊÃÖÌ80.40.000-13 ÊÃÖÌ80.40.000-14 |
80-40-160-460
80-40-200-500
80-40-250-550
80-40-280-580
80-40-320-620
80-40-360-660
80-40-400-700
80-40-450-750
80-40-500-800
80-40-560-860
80-40-630-930
80-40-710-1010
80-40-800-1100
80-40-900-1200
80-40-1000-1300 |
40-mm wide ears with the ØÑ40 bearings on the rod and sleeve |
Two holes N120x1.5 |
16 |
14.4 15.5 16.8 17.6 18.6 19.6 20.7
22
23.2 24.8 26.7 28.7 31.08 33.7 36.3 |
Busak+ Shamban |
|
ÊÃÖÌ80.45.000 ÊÃÖÌ80.45.000-01 ÊÃÖÌ80.45.000-02 ÊÃÖÌ80.45.000-03 ÊÃÖÌ80.45.000-04 ÊÃÖÌ80.45.000-05 ÊÃÖÌ80.45.000-06 ÊÃÖÌ80.45.000-07 ÊÃÖÌ80.45.000-08 ÊÃÖÌ80.45.000-09 ÊÃÖÌ80.45.000-10 ÊÃÖÌ80.45.000-11 ÊÃÖÌ80.45.000-12 ÊÃÖÌ80.45.000-13 ÊÃÖÌ80.45.000-14 |
80-45-160-460
80-45-200-500
80-45-250-550
80-45-280-580
80-45-320-620
80-45-360-660
80-45-400-700
80-45-450-750
80-45-500-800
80-45-560-860
80-45-630-930
80-45-710-1010
80-45-800-1100
80-45-900-1200
80-45-1000-1300 |
40-mm wide ears with the ØÑ40 bearings on the rod and sleeve |
Two holes N120x1.5 |
16 |
15.1 16.2 17.6 18.5 19.6 20.8
22
23.4 24.8 26.5 28.5 30.8 33.4 36.3 39.1 |
Busak+ Shamban |
|
ÊÃÖÌ80.50.000 ÊÃÖÌ80.50.000-01 ÊÃÖÌ80.50.000-02 ÊÃÖÌ80.50.000-03 ÊÃÖÌ80.50.000-04 ÊÃÖÌ80.50.000-05 ÊÃÖÌ80.50.000-06 ÊÃÖÌ80.50.000-07 ÊÃÖÌ80.50.000-08 ÊÃÖÌ80.50.000-09 ÊÃÖÌ80.50.000-10 ÊÃÖÌ80.50.000-11 ÊÃÖÌ80.50.000-12 ÊÃÖÌ80.50.000-13 ÊÃÖÌ80.50.000-14 ÊÃÖÌ80.50.000-15 |
80-50-160-460
80-50-200-500
80-50-250-550
80-50-280-580
80-50-320-620
80-50-360-660
80-50-400-700
80-50-450-750
80-50-500-800
80-50-560-860
80-50-630-930
80-50-710-1010
80-50-800-1100
80-50-900-1200
80-50-1000-1300
80-50-1265-1595 |
40-mm wide ears with the ØÑ40 bearings on the rod and sleeve |
Two holes N120x1.5 |
16 |
15.8
17
18.6 19.6 20.8 22.1 23.4 24.9 26.5 28.4 30.6 33.2
36
39.2 42.3 52.7 |
Busak+ Shamban |
|
ÊÃÖ100.50.000 ÊÃÖ100.50.000-01 ÊÃÖ100.50.000-02 |
100-50-500-830
100-50-630-960
100-50-725-1055 |
50-mm wide ears with the ØÑ50 bearings on the rod and sleeve |
Two holes N127x2 |
16 |
45.3
51
55.2 |
Busak+ Shamban |
|
ÊÃÖ110.56.000 ÊÃÖ110.56.000-01 ÊÃÖ110.56.000-02 ÊÃÖ110.56.000-03 ÊÃÙ 10.56.000-04 |
110-56-280-710
110-56-400-830
110-56-630-1060
110-56-800-1230
110-56-1120-1530 |
45-mm wide ears with the ØÑ50 bearings on the rod and sleeve |
Two holes N127x2 |
16 |
40.6 46.5 53.5 63.5 77.5 |
Busak+ Shamban |
|
ÊÃÖ186.00.000 ÊÃÖ186.00.000-01 ÊÃÖ186.00.000-02 ÊÃÙ 86.00.000-03 ÊÃÖ186.00.000-04 ÊÃÖ186.00.000-05 ÊÃÖ186.00.000-06 ÊÃÖ186.00.000-07 ÊÃÖ186.00.000-08 ÊÃÖ186.00.000-09 |
125-80-400-900
125-80-500-1000
125-80-800-1300
125-80-900-1400
125-80-1000-1500
125-80-1100-1600
125-80-1250-1750
125-80-1300-1800
125-80-1400-1900
125-80-200-700 |
60-mm thick ears with the holes Æ105 for the ØÑË70 bearing on the rod and sleeve |
See Fig. 1 |
20 |
81
88.5 110.8 118.3 125.7 133.2 144.4 148.1 155.5 66.1 |
Busak+ Shamban | |
| The manufacturer: Ltd Co «Hydraulic machine building plant» |
| SPECIAL HYDRAULIC CYLINDERS |  |
|
|
Hydraulic cylinder designation |
Parameters D-d-S-L |
Fastening method |
Working fluid delivery method |
Prat
MPa |
m, kg |
Dynamic connection seal manufacturer |
|
ÊÃÖ35.00.000 ÊÃÖ35.00.000-01 ÊÃÖ35.00.000-02 ÊÃÖ35.00.000-03 ÊÃÖ35.00.000-04 ÊÃÖ35.00.000-05 |
50-32-180-430
50-32-250-500
50-32-320-570
50-32-628-890
50-32-340-590
50-32-320-555 |
28-mm wide ears with the ØÑ25 bearings on the rod and sleeve. |
Two holes K3/8" |
16 |
7.3
8.5
9.7
15
10
9.6 |
Belarus Rezinotekhnika |
|
ÊÃÖ231.00.000 ÊÃÖ231.00.000-01 |
50-32-380-674
50-32-610-920 |
17-mm wide ear with the hole Æ 16 mm on the rod, fork (B=48 mm, b=32 mm) with 2 holes Æ16 mm on the sleeve. |
Two holes N120x1.5 |
16 |
10 13.6 |
Busak+ Shamban |
|
ÊÃÖ277.00.000 ÊÃÖ277.00.000-01 |
63-40-1490-1810
63-40-1190-1510 |
20-mm wide ears with the holes 03ÎÍ12 on the rod and sleeve. |
Two holes Ì14õ1,5 |
16 |
38.1 32.5 |
Busak+ Shamban, Dichtomatik |
|
ÊÃÖ190.00.000 ÊÃÖ190.00.000-01 ÊÃÖ190.00.000-02 |
72-63-500-800
72-63-800-1100
72-63-400-700 |
28-mm wide ears with the ØÑ25 bearings on the rod and sleeve. |
One hole Ì20õ1.5 (plunger) |
16 |
21.4 31.4 17.9 |
Busak+ Shamban |
|
ÊÃÖ07.00.00.000 ÊÃÖ07.00.00.000-01 |
80-40-400-700
80-40-630-930 |
30-mm wide ears with the holes in the bushings Æ40ìì on the rod and sleeve |
Two holes N120x1.5 |
16 |
21.7 27.7 |
Belarus Rezinotekhnika |
|
Hydraulic cylinder designation |
Parameters D-d-S-L |
Fastening method |
Working fluid delivery method |
Prat
MPa |
m, kg |
Dynamic connection seal manufacturer |
|
ÊÃÖ273.00.000 ÊÃÖ273.00.000-01 |
80-45-420-925
80-45-560-925 |
Ears with the ØÑ40 bearings with the protective facility Í=58ìì (Fig. 3) on the rod and sleeve. |
Two holes Ì20õ1.5 |
20 |
27.5 29.8 |
Dichtomatik |
|
ÊÃÖ60.00.000 ÊÃÖ60.00.000-01 ÊÃÖ60.00.000-02 ÊÃÖ60.00.000-03 ÊÃÖ60.00.000-04 ÊÃÖ60.00.000-05 ÊÃÖ60.00.000-06 ÊÃÖ60.00.000-07 ÊÃÖ60.00.000-08 ÊÃÖ60.00.000-09 ÊÃÖ60.00.000-10 ÊÃÖ60.00.000-11 ÊÃÖ60.00.000-12 |
80-50-160-525
80-50-200-565
80-50-250-615
80-50-280-645
80-50-320-685
80-50-400-765
80-50-560-925
80-50-630-995
80-50-710-1075
80-50-800-1165
80-50-900-1265
80-50-1000-1365
80-50-1400-1765 |
35-mm wide ears with the ØÑ40 bearings on the rod and sleeve. |
Two holes Ì27õ2 |
16 |
18.1 19.4 21 21.9 23.2 25.7 30.8 32.9 35.5 38.4 41.5 44.6 57.3 |
Busak+ Shamban |
|
ÊÃÖ158 |
100-45-400-720 |
Forks (B=70 mm, b=28 mm) with the holes Æ25 mm. |
Two holes M20x1.5 |
16 |
27.5 |
Belarus Rezinotekhnika |
|
ÊÃÖ274.00.000 |
100-50-560-925 |
Ears with the ØÑ50 bearings with the protective facility Í=65ìì (Fig. 3) on the rod and sleeve |
Two holes M20x1.5 |
20 |
48.7 |
Busak+ Shamban, Dichtomatik | |
| The manufacturer: Ltd Co «Hydraulic machine building plant» |
| ÁÍÄ-2 Mounted disk harrow (BND-2) |  |
The harrow is intended for cutting the lumps after ploughing and surface treatment of compacted soils after harvesting the cultivated crops. |
|
To be used with tractors of drawbar category |
1.4 |
|
Coverage, m |
2.2 |
|
Performance, ha/h |
2.1-2.8 |
|
Operating depth, cm
- after ploughing |
8-12
20 |
|
Weight, kg |
1000 | |
| The manufacturer: RUIE «Minskagroprommash Plant» |
| ÁÍÄ-1,8 Mounted disk harrow (BND-1,8) |  |
It is intended for splitting the soil layers after ploughing the soils, pre-sowing soil preparation without preliminary ploughing, soil treatment after harvesting the cultivated crops, maintenance of meadows and pastures contaminated with small stones with the diameter of not more than 10 cm and plant residues with the thickness of up to 2 cm. The modification of the ÁÍÄ-1,8 with the coverage of 2 m (10 disks) is also available. |
|
Type |
mounted |
|
Coverage, m |
1.8 |
|
Performance, ha/h |
1.6-2.1 |
|
Weight (without spare parts, tools and accessories kit), kg |
800 |
|
Maximum operating depth (for 2-3 passages), cm |
12-20 |
|
Overall dimensions, mm |
3000x2200x1200 |
|
Working speed, km/h |
9-12 |
|
To be used with tractors of drawbar category |
1.4 |
|
Disk diameter, mm |
650 |
|
Disk spacing, mm |
260 | |
| The manufacturer: Ltd Co "Bobruiskselmash" |
Prev 1 2 3 4 5 Next
|
|
ul. Karl Libkneht, 68
Minsk, 220036
phone:+375 17 208 68 33
|
|
